Note: Allpar does not take responsibility for the veracity of any information or opinion presented, does not claim expertise, has not necessarily verified or performed the fix, repair, or modification in this page, and is not responsible for any consequences. Please proceed at your own risk.

Removing Adhesive Trim

Jeff Silva wrote about removing adhesive trim

Carefully remove the strips and use some General Purpose Adhesive Cleaner/Remover by 3M. Just pour a little onto a rag and rub it into the adhesive that's left over. Let it sit for about a minute and use a terry cloth towel to remove what the remover has eaten through using a buffing motion. Repeat this and the adhesive will come off without damaging the paint. Be sure to use some rubber gloves and work outside or in a well ventilated garage. After you've removed all of the adhesive you should wax the areas throughly to give it a good shine. I've had good luck with the green Turtle Wax paste and Classic Quick Wax.