Chrysler Fault Code 55: end of fault code list

by Bob O’Neill and Bob Lincoln

Code 55 indicates end of codes. If you are retrieving codes, code 55 will indicated that you have reached the end of the code list.  Code 55 will always be reported regardless of if there is another code to report or not. If you don’t receive a code 55 when retrieving codes, the power limited light may be burned out (or you may not have done the code checking procedure correctly).

When you turn the key to ‘on’ the light will be lit for a few seconds and go out. This is a way to test for a good bulb.

Sensors, Switches, and Other Systems | Main Repairs Page | EEKs

Disclaimer: The information provided in this and linked pages are intended for informational use and are provided as accurate to the best of our knowledge.  Neither the author nor Allpar.com is to be held responsible for their contents or the use of the information by you the reader. THE INFORMATION IS OFFERED “AS IS” FOR INFORMATIONAL PURPOSES AND WITHOUT WARRANTIES OF ANY KIND EITHER EXPRESSED OR IMPLIED. IF YOU USE THIS INFORMATION YOU RELEASE THE AUTHOR AND ALLPAR.COM FROM ANY LIABILITY WHATSOEVER.