Help!!!

I have a 2000 Jeep GC (4.0L) and this week I've started having troubles.

I am receiving 4 trouble codes and I'm not sure exactly what they mean and need advice about specific items I should check and the BEST way to get them corrected.

I have had no work performed on my jeep recently. One day I was driving and the dashboard light with the key in the circle with a line through it came on then my dash gauges when out. The truck stalled. I restarted the truck and everything was fine.

This happened a few more times, with and without the engine stalling, and has progressed to the Information Center not relaying data, power windows not working, a/c not working, and the dashboard gauges work some of the time.

Here is what I have found out about the trouble codes:

P0783 - 3/4 Shift Solenoid: No RPM Drop at Lockup.

P1685 - SKIM Invalid Key: The engine controller has received an invalid key from the SKIM.

P1686 - No SKIM BUS Messages Received: No CCD/J1850 messages from the Smart Key Immobilizer Module (SKIM).

P1687 - No MIC BUS Message: No CCD/J1850 messages received from the Mechanical Instrument Cluster (MIC) module.

What should I do next that won't break the bank?

All help is appreciated.

t2erns, on Oct 9 2006, 10:53 PM, said:

The post above seems to have solved my problem. I took out the JB15 fuse for about 1 minute then reinserted the fuse. This seems to have solved the problem.

I am a fan of this forum.

Thanks guys.

Ughhh :angry:
Pulling the JB15 fuse for a minute then replacing it worked for about a week. So, I am continuing to have the same problems.

Any suggestions before I take my jeep to a mechanic? I'm thinking that there might be a loose connector somewhere but I haven't been able to find any schematics so I can locate the modules that may be the problem.

Help!