Sign In
Register
Help
If you were a registered user, you would not be seeing this!
Does anyone know where I can get my hands on a new sway bar? Mine sounds like its gonna fall off.
Welcome to Allpar Forums for Chrysler, Dodge, Jeep, Plymouth, and more
 |
Welcome to Allpar Forums for Chrysler, Dodge, Jeep, Plymouth, and more, like most online communities you must register to post in our community (and to view some of the forums), but don't worry this is a simple free process that requires minimal information. Take advantage of it immediately, Register Now or Sign In.
|
| Guest Message © 2009 DevFuse | |
Sponsored by DiscountMoparParts.net
Visit our sponsor's forum!
Allpar's huge minivan section with tons of current and past model tech details...
Register and log in now! Then you can avoid seeing all these ads!
Page 1 of 1
Sway Bar - Chrysler Pacifica
Rate Topic:
#1 Guest_cowli4nia_*
Posted 14 January 2009 - 08:31 AM
Does anyone know where I can get my hands on a new sway bar? Mine sounds like its gonna fall off.
MultiQuote
#2
- Normal
-
- Group: Active Member
- Posts: 66
- Joined: 21-October 05
Posted 14 January 2009 - 11:48 AM
It just might be your bushings. How old is it? How many miles are on it? I think you can get replacement bushings at Dodge.
#3
- Prolific
-
- Group: Active Member
- Posts: 2,258
- Joined: 08-June 08
- Location:Rochester,NY.
Posted 14 January 2009 - 02:22 PM
Check the bushings and links for play. Earlier links had issues.
#4 Guest_cowli4nia_*
Posted 14 January 2009 - 05:42 PM
fsb, on Jan 14 2009, 10:48 AM, said:
It just might be your bushings. How old is it? How many miles are on it? I think you can get replacement bushings at Dodge.
Car has 107,000 miles on it. I have looked on the internet for the bushings but no luck. Could you guys direct me to the right place? I mean, I just want the part. I will try and replace myself.
#5
- Semper Paratus
-
- Group: Supporters III
- Posts: 3,656
- Joined: 03-January 05
- Location:Orange County, NY
Posted 16 January 2009 - 11:40 AM
It's probably the end links. (I'm waiting for warmer weather to replace mine; I have 70K miles on the vehicle and they're shot already.) They use the same exact links as the Gen 3 and 4 minivans, so they are readily available at any auto parts store. I recommend paying a few extra bucks for links that have grease fittings.
#6
- Moderately New
-
- Group: Active Member
- Posts: 10
- Joined: 06-September 04
Posted 09 February 2009 - 05:29 PM
If you were a registered user, you would not be seeing this!
NYBo, on Jan 16 2009, 11:40 AM, said:
It's probably the end links. (I'm waiting for warmer weather to replace mine; I have 70K miles on the vehicle and they're shot already.) They use the same exact links as the Gen 3 and 4 minivans, so they are readily available at any auto parts store. I recommend paying a few extra bucks for links that have grease fittings.
My Pacifica as 160,000 km, I have in the last year change both left and right links, and now I am getting the Bushing change (back order), its very noisy in the front.
Page 1 of 1
