Jump to content

Welcome to Allpar Forums for Chrysler, Dodge, Jeep, Plymouth, and more

Welcome to Allpar Forums for Chrysler, Dodge, Jeep, Plymouth, and more, like most online communities you must register to post in our community (and to view some of the forums), but don't worry this is a simple free process that requires minimal information. Take advantage of it immediately, Register Now or Sign In.

  • Start new topics and reply to others
  • Subscribe to topics and forums to get automatic updates
  • Add events to our community calendar
  • Get your own profile and make new friends
  • Customize your experience here
Guest Message © 2009 DevFuse

Sponsored by DiscountMoparParts.net


Visit our sponsor's forum!



Ram · Fargo · Dakota · Durango

Register and log in now! Then you can avoid seeing all these ads!

Page 1 of 1
  • You cannot start a new topic
  • This topic is locked

47RE Transmission

#1 Guest_KB291_*

  • Group: Guests

Posted 13 May 2007 - 09:37 AM

If you were a registered user, you would not be seeing this!

Need help!
I have a 2002 2500 Quadcab, SB, 4WD w/ 47RE Trans. After a road trip I noticed the trans was slipping in 1st gear. Now it seems like I have to build up RPMS to get moving after stopping. This happens when engine is warm. Yesterday, when pulling small boat up boat ramp the RPMS seemed to rev up before tranny engaged. Also fuel mileage has dropped. Any clues?
0

#2 User is offline   plypete 

  • Normal
  • PipPip
  • Group: Active Member
  • Posts: 186
  • Joined: 07-January 05
  • Location:Centerville, SD

Posted 13 May 2007 - 06:49 PM

I would drop the pan and inspect for abnormal debris. Does the fluid smell burned? If all looks ok when the pan is off, I would adjust the bands, fill with fresh fluid, install a new filter and give it a try. If you have excessive clutch material or ANY metal chunks in the pan, stop there and have a reputable transmission shop check it out.
0

#3 User is offline   DODGEIT105 

  • New
  • Group: Members
  • Posts: 2
  • Joined: 24-October 08

Posted 02 September 2009 - 07:54 PM

It is possible that the Governor Pressure Solenoid is malfunctioning allowing the transmission to start out in 3rd gear instead of first. Do you have a check engine light
lit.
0

#4 User is online   TWX 

  • I can stop any time I want!
  • PipPipPipPipPipPip
  • Group: Forum Leader
  • Posts: 6,499
  • Joined: 23-January 03
  • Location:Phoenix, Arizona

Posted 02 September 2009 - 10:54 PM

Yeah, this topic is more than two years old. The original poster no longer has an account either. Closing...
0
Page 1 of 1
  • You cannot start a new topic
  • This topic is locked


Allpar Home · Cars · Engines · Repairs · People · Car Reviews · News · Videos

Please read the terms of use. We are not affiliated with Chrysler, LLC, makers of cars, minivans, trucks, and Mopar parts. We make no guarantees regarding validity or applicability of information, opinions, or advice. Posts may be edited and used in other parts of allpar.com and affiliated Mopar-related sites. We have the right to remove or modify any message, or ban or suspend any user without notice. Logos and site-specific information copyright © 2001-2009 Allpar LLC; Chrysler car PR materials remain property of Chrysler, LLC.

Pentastar engines · Mac statistics software ·  Chrysler, Dodge, Plymouth, and Jeep cars, trucks, minivans