Jump to content

Hello, Allpar Forums member or visitor! If you were an active member (more than two posts) or subscriber, you would not see this ad!

Register for a free account or Sign in (see top right of page for Facebook/Open ID login icons).

- - - - -

code P1294 Manufacturer Control Fuel Air Metering.

This topic has been archived. This means that you cannot reply to this topic.
1 reply to this topic

#1 printone2

  • Active Member
  • 52 posts

Posted May 18, 2008 at 03:34 pm

I have a 99 GC ES 3.8L 200,000 miles and Check Engine is on. I've got a code P1294 Manufacturer Control Fuel Air Metering. Previously I was having an EGR code. I replaced the EGR and after a few days it begins to throw this code. The only research I have been able to find is a possible vacuum leak or a bad Idle Air control solenoid.
Anyone had this error before?

#2 alvin

  • Active Member
  • 976 posts

Posted May 18, 2008 at 10:35 pm

P1xxx codes are manufacturer specific and only original definitions should be used. Apparently in the aftermarket they attempt to substitute generic descriptions. For Chrysler, P1294 means "Target idle not reached".


Home · Cars · Engines · Repairs · People
Tool and Car Reviews · News

Please read the terms of use and privacy policy. We are not affiliated with Chrysler Group, makers of cars, minivans, trucks, and Mopar (TM) parts. We make no guarantees regarding validity or applicability of information, opinions, or advice. Posts may be edited and used in other parts of allpar.com and affiliated Mopar (Dodge, Chrysler, etc) car related sites. We have the right to remove or modify any message, and to ban or suspend any user without notice. Logos and site-specific information copyright © 2001-2013 Allpar LLC; Chrysler PR materials remain property of Chrysler Group.