Eibach Springs |
|---|
Eibach is the leading maker of advanced suspension components, with customers from Alfa Romeo to McLaren. They make coil over springs, conventional coils, anti-roll bars, and a wide range of other springs.
Pro-Kit Springs
The Eibach Pro-Kit sport lowering spring set improves both performance and looks. By lowering the car's center of gravity and optimizing spring rates, the roll, dive, and squat that normally occur during aggressive driving are substantially reduced. Pro-Kit springs also minimize the fender gap that makes a car look "lifted." Lowering the car may also improve aerodynamics, though it does increase vulnerability to hazards such as speed bumps and snow. These springs lower cars by about an inch, making a good compromise between being too low and extracting the best possible performance.
Pro-Control Strut Tower Bars
A car with a sport-tuned suspension can generate enough cornering force to cause slight twisting of the vehicle's unibody chassis. This twist can cause unwanted alignment changes that lead to unpredictable handling. By tieing the top of the strut towers together, twist is greatly reduced and vehicle/chassis response is improved. Eibach Pro-Control Strut Tower Bars are made of high quality aluminum alloy and are designed specifically for your vehicle. They are polished to a high gloss and include all necessary mounting hardware and complete installation instructions.
Anti-Roll Bar Kit
While Eibach Pro-Kit springs represent the major tuning device for your suspension, additional roll stiffness can be achived by using the Eibach Anti-Roll Bar kit. Anti-roll bars further reduce body roll and allow fine tuning of the vehicle's suspension. The goal is neutral, predictable handling. Eibach Anti-Roll Bars are cold formed from high strength, aircraft grade steel and are carefully designed to fit your vehicle without modification. They can be an excellent addition to most non-Shelby Dodge and Plymouth vehicles, since replacing the rear sway bar with a heavier-duty one can be, well, difficult.
Pro Kits for Chrysler, Plymouth, and Dodge Cars
|
|
|
|
|
| 1986-1991 | Daytona / Shelby Z (4Cyl) | 1.00 | 2801.140 |
| 1993 | Intrepid, Concorde, Vision | 1.00 | 2806.140 |
| 1986-1989 | Lancer, LeBaron GTS | 1.00 | 2804.140 |
| 1995-1999 | Neon | 1.25 | 2815.140 |
| 1986-1989 | Shadow and Sundance | 1.00 | 2804.140 |
| 1986-1989 | Spirit, Acclaim, AA-body LeBaron, Saratoga | 1.00 | 2804.140 |
| 1995 | Stratus, Cirrus, Breeze | 1.25 | 2816.140 |
Applications - Trucks
|
|
|
|
|
|
| 1987-1995 | Dakota V6 (2WD) | 1.00 | 2846.520 | TK |
| 1987-1995 | Dakota V8 (2WD) | 1.50 | 2846.520 | TK |
| 1994 | Ram 1500 (2WD) | 2.00 | 2841.520 | TK |
| 1994 | Ram 1500 (2WD) | 1.00 | 2840.520 | TK |
| 1994 | Ram 2500 (2WD) | 2.00 | 2840.520 | TK |
Applications — sold as Chryslers, made by Mitsubishi
|
|
|
|
|
|
|
| 1995 | Avenger/Sebring | 1.25 | 1.25 | 2817.140 | Pro Kit |
| 1983-1989 | Conquest | 1.25 | 1.00 | 6003.140 | Pro Kit |
| 1991 | Stealth R/T (2WD, base and ES) | 1.00 | 1.00 | 2813.140 | Pro Kit |
| 1991 | Stealth R/T (2WD, except base and ES) | 1.00 | 1.00 | 2810.140 | Pro Kit |
| 1991-1994 | Stealth R/T Turbo (AWD) | 1.00 | 1.00 | 2811.140 | Pro Kit |
Notes
Partly because this list was written around 1997, we cannot promise that every part number, price, or description given in this list is 100% free of error. Note that installing performance parts may void your warranty, result in damage to your vehicle, reduce the safety of your vehicle, or cause failure of emissions tests. You are solely responsible for the consequences of using aftermarket parts of any kind.
