AF: 1987 Dodge 600se Both front door (left and right) entry light covers | Allpar Forums
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1987 Dodge 600se Both front door (left and right) entry light covers

Discussion in 'Parts Wanted' started by dc8flyer, Jan 29, 2020.

  1. dc8flyer

    dc8flyer Well-Known Member

    Joined:
    Feb 12, 2014
    Messages:
    226
    Likes:
    23
    Could not find the diagram in the IT section of the parts catalog so here is a picture.

    Would like to replace both front door entry light covers that are on the lower section of the door panels. The tabs have broken off or are about to break.


    1987 Dodge 600se Front Door Light Cover.JPG
     
  2. ImperialCrown

    ImperialCrown Moderator
    Level III Supporter

    Joined:
    Jun 8, 2008
    Messages:
    20,729
    Likes:
    3,991
  3. dc8flyer

    dc8flyer Well-Known Member

    Joined:
    Feb 12, 2014
    Messages:
    226
    Likes:
    23
    #3 would be the lens and I suspect #4 would be the chrome housing. Hoping to find #3 and #4 together.

    But #4 I believe houses the lens #3 and also #4 has the tabs that lock into the bezel #10A. The tabs are broken so it wont latch and stay put.

    Thanks for finding that. p211
     
  4. dc8flyer

    dc8flyer Well-Known Member

    Joined:
    Feb 12, 2014
    Messages:
    226
    Likes:
    23
    Repaired and fits snugly.

    Repairedmoreorless.JPG
     
    valiant67 likes this.
  5. slim slow slider

    slim slow slider Well-Known Member

    Joined:
    May 19, 2012
    Messages:
    361
    Likes:
    27
    What did you use?
     
  6. dc8flyer

    dc8flyer Well-Known Member

    Joined:
    Feb 12, 2014
    Messages:
    226
    Likes:
    23
    I used two hose clamps .25 inch, opened them up, cut to size, carefully shaped, and used the plastic bonder to secure the clamps in place. I also put a little bit of the Bonder on the two remaining plastic tabs to shore them up as well.

    Hose Clamp.JPG Plastic Bonder.JPG
     
  7. slim slow slider

    slim slow slider Well-Known Member

    Joined:
    May 19, 2012
    Messages:
    361
    Likes:
    27
    Excellent! Thanks for sharing. Glad to see you got creative and make things work. Good for you!!
     

Share This Page

Loading...
 We are not affiliated with FCA. We make no claims regarding validity or accuracy of information or advice. Copyright © VerticalScope Inc. All rights reserved.