Hello, Allpar Forums member or visitor! If you were a member, you would not see this ad!

Register or log in at the top right of the page...

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1994 LHS Starting issue

Discussion in 'LH: Large Cars, 1993-2004' started by JerCrest01, Jul 18, 2017.

  1. JerCrest01

    JerCrest01 New Member

    Joined:
    Mar 18, 2016
    Messages:
    7
    Likes:
    0
    Hello,

    Today I replaced a snapped timing belt and when I got the engine and everything all buttoned up, and when I went to start up my car all I hear is the fuel pump with no engine cranking.

    Any help would be appreciated.
     
  2. ImperialCrown

    Level III Supporter

    Joined:
    Jun 8, 2008
    Messages:
    18,346
    Likes:
    2,707
    Do you hear the starter click? The engine crankshaft and both camshafts turn and all the marks are lined up correct?
    Make sure that all connectors are plugged in and all fuses are good.
     
  3. JerCrest01

    JerCrest01 New Member

    Joined:
    Mar 18, 2016
    Messages:
    7
    Likes:
    0
    no starter click, and yes the timing marks are alligned just right and double checked.
     
  4. ImperialCrown

    Level III Supporter

    Joined:
    Jun 8, 2008
    Messages:
    18,346
    Likes:
    2,707
    Make sure that all electrical connectors and grounds have been refastened after the job. Something sounds like it has lost contact.
     
  5. JerCrest01

    JerCrest01 New Member

    Joined:
    Mar 18, 2016
    Messages:
    7
    Likes:
    0
    will recheck the only electrical thing that I unplugged was the electric radiator fan.
     
  6. Tomguy

    Tomguy Well-Known Member

    Joined:
    Oct 4, 2011
    Messages:
    1,041
    Likes:
    629
    Smack the starter with a BFH. When mine was going it did the same thing you describe.
     

Share This Page

Loading...