Hello, Allpar Forums member or visitor! If you were a member, you would not see this ad!

Register or log in at the top right of the page...

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Chrysler Patents and Trademarks

Discussion in 'Rumors and Speculation' started by hemidakota, Jun 14, 2005.

  1. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    ABTRACT: Vehicle multi-mode vertical-split-screen display

    A vehicle information system includes a "portrait" in-dash touchscreen display for simultaneously displaying both vehicle-specific and application-specific information as vertically-stacked "landscape" renderings, or for displaying a selected one of either the vehicle-specific or application information as a single "portrait" rendering. A further region of the touchscreen's active surface, preferably along its upper margin, is reserved as a fixed command bar to facilitate manual "touch" selection of the information to be displayed on the remainder of the touchscreen's active surface, while the system further dynamically responds to vehicle and operational parameters to select the information for display as appropriate, for example, based on vehicle operation conditions.
    fiat.jpg
    LINK: United States Patent: 9542029
     
  2. wtxiceman

    wtxiceman Well-Known Member

    Joined:
    Aug 30, 2009
    Messages:
    594
    Likes:
    479
    Charger pursuit option?
     
  3. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    Correct...
     
  4. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    Untitled.jpg

    Reclining seat for a vehicle



    Abstract - A vehicle seat includes a seat base and a seat bottom pivotally coupled to the seat base such that the seat bottom is movable between a seating position, stowed position, and reclined position. A seat guide assembly is configured to couple to a vehicle rear wall, and includes a guide bracket having a slot formed therein and a pin extending through the slot and configured to travel along the slot. The vehicle seat includes a seat back having an upper end, a lower end, and a latch coupled to the upper end. The lower end is pivotally coupled to the seat bottom, and the latch is configured to receive the pin. The seat back upper end travels with the latch and pin along the slot such that the seat back is movable between a seating position, stowed position, and reclined position along a predetermined path relative to the vehicle wall.

    Patent Images (at http://pdfpiw.uspto.gov/.piw?Docid=09573490&homeurl=http%3A%2F%2Fpatft.uspto.gov%2Fnetacgi%2Fnph-Parser%3FSect1%3DPTO2%2526Sect2%3DHITOFF%2526p%3D1%2526u%3D%25252Fnetahtml%25252FPTO%25252Fsearch-adv.htm%2526r%3D1%2526f%3DG%2526l%3D50%2526d%3DPTXT%2526S1%3DFCA.ASNM.%2526OS%3DAN%2FFCA%2526RS%3DAN%2FFCA&PageNum=&Rtype=&SectionNum=&idkey=NONE&Input=View+first+page )
     

    Attached Files:

  5. wtxiceman

    wtxiceman Well-Known Member

    Joined:
    Aug 30, 2009
    Messages:
    594
    Likes:
    479
    New DT ram rear seat perhaps.
     
  6. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    I was hoping for FOLD FLATS.
     
    wtxiceman likes this.
  7. GasAxe

    GasAxe Well-Known Member

    Joined:
    May 12, 2008
    Messages:
    4,432
    Likes:
    5,158
    That would be awesome on Crew and Mega cabs.
     
    wtxiceman likes this.
  8. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    Cold air intake circulating air jacket

    Abstract -

    An air intake assembly arranged in an engine compartment of an automotive vehicle and configured for directing air into a throttle body of an engine of the vehicle is provided. The air intake assembly includes an air intake duct and an air jacket. The air intake duct is configured to direct air from an inlet duct to the throttle body. The air jacket is arranged around the air intake duct. The air jacket has a first air jacket opening and a second air jacket opening. The air jacket forms an air gap between the air jacket and the air intake duct. Air flowing through the air jacket from one of the first and second air jacket openings to the other of the first and second air jacket openings cools the air intake duct thereby reducing a temperature of air directed from the intake duct into the throttle body.

    LINK: United States Patent: 9777681 (at http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-adv.htm&r=2&f=G&l=50&d=PTXT&S1=FCA.ASNM.&OS=AN/FCA&RS=AN/FCA )
     

    Attached Files:

    • 4.pdf
      File size:
      41.9 KB
      Views:
      2
  9. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    Watertight vehicle air duct system

    Abstract

    A duct for a vehicle includes an inlet fluidly coupled to an interior of the vehicle and an outlet fluidly coupled to the inlet. A buoyant closure member is disposed between the inlet and the outlet and is movable between an open position permitting flow between the inlet and the outlet and a closed position preventing flow between the inlet and the outlet. The buoyant closure member is normally in the open position and is movable from the open position to the closed position in response to a predetermined volume of water entering the outlet.

    LINK: United States Patent: 9751383 (at http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-adv.htm&r=15&f=G&l=50&d=PTXT&S1=FCA.ASNM.&OS=AN/FCA&RS=AN/FCA )
     

    Attached Files:

    • 3.pdf
      File size:
      23.7 KB
      Views:
      2
  10. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    Off-axis motor with hybrid transmission method and system

    Abstract

    A system and method for modifying a transmission in a gasoline-electric hybrid vehicle to couple the transmission to an off-axis electric motor. The transmission includes a motor-driven gear that replaces or modifies an engine-driven reverse gear. The motor-driven gear is hard-splined to an output shaft of the transmission. An electric motor is coupled to the output shaft of the transmission via the motor-driven gear. The electric motor may thus be oriented along an axis that differs from the axis of the transmission's output shaft.

    LINK: United States Patent: 9777798 (at http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-adv.htm&r=1&f=G&l=50&d=PTXT&S1=FCA.ASNM.&OS=AN/FCA&RS=AN/FCA )
     

    Attached Files:

    • 2.pdf
      File size:
      9.5 KB
      Views:
      3
  11. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    Movable buckle mounting system

    Abstract

    An adjustable occupant restraint system for a vehicle includes a floor bracket configured to couple to a vehicle floor, a link system rotatably coupled to the floor bracket, and a seat belt buckle coupled to the link system. The link system rotates in response to and along with the fore/aft adjustment of the vehicle seat to substantially maintain the seat belt buckle at a hip point of a seat occupant throughout the fore/aft adjustment of the vehicle seat.

    LINK: United States Patent: 9802570 (at http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-adv.htm&r=3&f=G&l=50&d=PTXT&S1=FCA.ASNM.&OS=AN/FCA&RS=AN/FCA )

    Seat belt.jpg
     
  12. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    United States Patent 9,783,246
    Long , et al.
    October 10, 2017
    Vehicle cargo compartment having work surface assembly

    Abstract
    A vehicle includes a cargo bed attached to a rear of a cab. The cargo bed includes a plurality of walls defining a periphery of the cargo bed. At least one of the plurality of walls includes a storage compartment formed therein. A work surface assembly includes a worktable and a plurality of arms attached to the worktable and pivotally attached to a wall of the storage compartment at a location inside of the storage compartment. The work surface assembly is pivotal between a stowed position in which the work surface assembly is wholly contained within the storage compartment and a deployed position in which the worktable and a portion of each arm extend out of the storage compartment.

    LINK: United States Patent: 9783246 (at http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-adv.htm&r=9&f=G&l=50&d=PTXT&S1=FCA.ASNM.&OS=AN/FCA&RS=AN/FCA )
     

    Attached Files:

    UN4GTBL likes this.
  13. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
  14. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
  15. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    PATENT: Deployable center console

    Abstract

    A storage console for a vehicle is provided and may include a housing movable from a stowed position to an upright position. The housing may include a top surface that is substantially flush with a floor of the vehicle in the stowed position and is spaced apart from the floor in the upright position.

    Console.png

    Inventors: Mather; Carl (Lake Orion, MI), Socks; Kenric P (Leonard, MI)

    LINK: United States Patent: 9809173 (at http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-adv.htm&r=6&f=G&l=50&d=PTXT&S1=FCA.ASNM.&OS=AN/FCA&RS=AN/FCA )
     
  16. Hemidakota

    Hemidakota Active Member

    Joined:
    Jan 24, 2017
    Messages:
    597
    Likes:
    368
    PATENT: Reclining seat assembly

    Abstract - A reclining seat assembly includes a seat frame, and a backrest frame supported by the seat frame for pivoting movement about a backrest pivot axis. A seat pan has a forward portion supported by the seat frame for relative longitudinal movement, for example, using a slider. The seat pan has a rearward portion that is pivotally supported along a rear seat pan axis by a lower extension of the backrest frame, such that the backrest frame reclines relative to the seat frame upon forward longitudinal movement of the rear seat pan pivot axis relative to the seat frame. A backrest recline angle adjuster on the seat frame, such as a pair of linear actuators respectively coupling the seat frame to each side of the backrest frame along an actuator pivot axis that is itself offset from the backrest pivot axis, maintains a selected position of the rear seat pan support axis relative to the seat frame to thereby achieve a desired backrest inclination.

    Seat.png

    Inventors: Finck; James W (Clarkston, MI)

    LINK: United States Patent: 9809133 (at http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-adv.htm&r=9&f=G&l=50&d=PTXT&S1=FCA.ASNM.&OS=AN/FCA&RS=AN/FCA )
     
  17. redriderbob

    redriderbob Mopar Guru!
    Level 2 Supporter

    Joined:
    Feb 22, 2004
    Messages:
    9,521
    Likes:
    15,077
    ScramFan likes this.
  18. redriderbob

    redriderbob Mopar Guru!
    Level 2 Supporter

    Joined:
    Feb 22, 2004
    Messages:
    9,521
    Likes:
    15,077
    Actually the is the front and rear bumper patients for the 2017 to Present Jeep Grand Cherokee SRT... note the exhaust and LED fog lights in front fascia.

    [​IMG]

    [​IMG]
     
  19. redriderbob

    redriderbob Mopar Guru!
    Level 2 Supporter

    Joined:
    Feb 22, 2004
    Messages:
    9,521
    Likes:
    15,077
    This looks to be the new generation of RamBox.
     

Share This Page

Loading...