AF: Mapping my DIY Electronic Ignition :) | Allpar Forums
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mapping my DIY Electronic Ignition :)

Discussion in 'A Body: Duster, Valiant, Dart, etc' started by 1966DartConvertible, Sep 26, 2012.

  1. 1966DartConvertible

    1966DartConvertible Active Member

    Joined:
    Jul 25, 2010
    Messages:
    293
    Likes:
    7
    Got my distributor fixed, now mapping the ignition timing vs. RPM vs. load using the handheld trigger.

    I can retard/advance the ignition timing at every 300rpm increments (or 500rpm increment if you wish) (15 steps i.e. 0 - 4500rpm) vs. load (throttle). Here is a picture or two :

    [​IMG]

    and here ive also fitted the 3-3/8" Sun Pro Tacho on the column (can't fit on top, no clearance)

    [​IMG]

    :)

    Syed
    Malaysia
     
  2. tazdevil

    tazdevil Member

    Joined:
    Nov 14, 2009
    Messages:
    560
    Likes:
    61
    The apparent problem is the improper placement of the steering column! Geez!
     

Share This Page

Loading...
 We are not affiliated with FCA. We make no claims regarding validity or accuracy of information or advice. Copyright © VerticalScope Inc. All rights reserved.