The Valiant I am working on must have hit a parking lot curb. The oil pan was smashed flat, took 2 hrs. just to make it right. Luckily the oil pick-up is good. Anyway, I could not get fan belts off until I removed the bolt to the back side of the valance. This piece is riveted to the frame and bolted to the valance in center with damper. Was so close to damper and transmission cooling lines that it was pretty close to rubbing thru. I think it needs straightening, but I cannot find it in the parts book. Somebody please send a picture of theirs or let me know if it is supposed to be straight. It is in a curve right before the frame, like before, so I figure it too is bent. Thanks in advance.