AF: Need ONE brass fitting, old school, 3/8 male to 1/2 male flare 90 degree | Allpar Forums
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Need ONE brass fitting, old school, 3/8 male to 1/2 male flare 90 degree

Discussion in 'Parts Wanted' started by DC-93, Dec 8, 2019.

  1. DC-93

    DC-93 Well-Known Member

    Joined:
    May 1, 2014
    Messages:
    2,708
    Likes:
    1,505
    Need only one like the pics. The new stuff has been cheapened up and slimmed down - doesn't look the same.

    All the places I have contacted on line and around me locally carry new, cheap quality stuff.
    Hoping someone has an old piece around in a tool box, garage, etc.

    Used on a "water puppy" pump, mounted on the rear axle cooler for the #88 Daytona stock car.
    Here's pics of the original, just need one more! Thanks! PM me here.
     

    Attached Files:

  2. DC-93

    DC-93 Well-Known Member

    Joined:
    May 1, 2014
    Messages:
    2,708
    Likes:
    1,505
    I was asked for a few more pics. Need a few barbed hose ends, too.
    3/8 and 1/2.
    There are numbers on the hose ends:
    2462-1010 on the 1/2.
    2462-88 on the 3/8

    PM please, thanks!

    wanted brass fittings like these.JPG wanted brass fittings like this.JPG wanted these brass fittings.JPG
     
  3. DC-93

    DC-93 Well-Known Member

    Joined:
    May 1, 2014
    Messages:
    2,708
    Likes:
    1,505
    I was told a better description for the flared side is "AN 10" fitting.

    Hope this helps.
     
  4. DC-93

    DC-93 Well-Known Member

    Joined:
    May 1, 2014
    Messages:
    2,708
    Likes:
    1,505
    And - the brass barbed hose ends are AN 8 and AN 10 in size.

    The "1/2" posted above should have been "5/8". Thanks.
     
  5. DC-93

    DC-93 Well-Known Member

    Joined:
    May 1, 2014
    Messages:
    2,708
    Likes:
    1,505
    NOW, been told by a few experts the fitting, hose ends are NOT AN, just regular flare....

    Learn something new everyday.
     
  6. DC-93

    DC-93 Well-Known Member

    Joined:
    May 1, 2014
    Messages:
    2,708
    Likes:
    1,505
    Found the 90 degree fitting, still need the vintage brass hose ends.
    sizes of hose ends and fitting, sized.JPG
     

Share This Page

Loading...
 We are not affiliated with FCA. We make no claims regarding validity or accuracy of information or advice. Copyright © VerticalScope Inc. All rights reserved.