Hello, Allpar Forums member or visitor! If you were a member, you would not see this ad!

Register or log in at the top right of the page...

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Why isn't my 1990 Chrysler new yorker landau getting any spark?(Vi

Discussion in 'EEK!FAQ' started by Kenny Welden, Aug 25, 2012.

  1. Kenny Welden

    Kenny Welden New Member

    Joined:
    Aug 25, 2012
    Messages:
    9
    Likes:
    0
    I replaced the spark plugs, wires, ignition coil, coil pack, and battery. I made a video with the codes it spits out, I just don't understand it. I'm new to this and it's my first car.


     
  2. valiant67

    valiant67 Rich Corinthian Leather
    Level III Supporter

    Joined:
    Jan 7, 2003
    Messages:
    31,680
    Likes:
    10,956
    If I counted correctly it was 12, 22, 23, 24 and 55. I don't think any of those would account for no spark.
    http://www.allpar.com/fix/80s-codes.html
    I can't tell which engine you have as the 3.3 indicates a coil pack and the coil indicates a 3.0. You won't have both.
    if this is a 3.3 powered car and there is not spark,I'd look at the crank position sensor. They can fail with no error codes. The sensor requires a very specific depth when mounted and a new one uses a paper spacer to set the depth.
    If it's a 3.0 car, I'd suspect the distributor.
     
  3. Kenny Welden

    Kenny Welden New Member

    Joined:
    Aug 25, 2012
    Messages:
    9
    Likes:
    0

    My bad, it's a 3.3L v6
     

Share This Page

Loading...