Allpar Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 202 Results
  1. Non-Mopar Tech Support
    Hello, I just recently acquired a 1989 New Yorker (with ABS). So far most things on it are running smoothly. However the brake pedal is stiff and feels as though the power brakes aren't functioning at all. I opened up the hood to see if it could be a vacuum leak but I don't so a brake booster...
  2. Rumors and General Chrysler Discussion
    Ralph Gilles reflects on the impact the outgoing 300 had on Chrysler, and pop culture at large. https://www.autonews.com/cars-concepts/chrysler-300-nears-end-road-after-years-pop-culture-icon
  3. Cars and Parts Wanted
    I'm in need of either good used or new old stock opera light lenses for an 88 Fifth Avenue. I'm not 100% sure, but I believe the opera lenses themselves are all the same from 1982-89.
  4. Mopar / Stellantis News
    I was wondering where Ralph was these days, until I came across a couple of recent articles and interviews on Automotive News. He is such a down to earth guy; a rarity in this day and age. It is always refreshing to hear from him. He has quite a bit to say about upcoming Mopar designs...
  5. Repairs, Maintenance, Help
    It has the 62Te transmission went to drive it one day and nothing, won’t go into any gear doesn’t even try, was no warning wasn’t making unusual sounds. Error codes P0721 p0791 po716 ** about a week before it stopped moving a new battery and alternator were fitted. I’m not sure if that’s...
  6. Repairs, Maintenance, Help
    Hello, I have a 1988 Lebaron Convertible with the 2.2 Turbo. I changed the fuel pump and filter cause there were dead. I put new rubber fuel lines. Now when the engine is running, I have a leak coming from the lines. After ten minutes the leak stops and then if i wait one week to start the car...
  7. Repairs, Maintenance, Help
    I, i have a 1988 Chrysler Lebaron and i'm trying to replace a door speaker that is missing. The problem is there are 4 wires for the speaker : With the diagrams available on internet i found that the pink one was the positive and the blue/red negative but i don't understand the other two...
  8. Rumors and General Chrysler Discussion
    https://www.autoevolution.com/news/full-sized-chrysler-cordoba-revival-brings-digital-thoughts-of-righteous-land-yachts-203967.html What are you all thinking about this? I think it looks a bit Buick ish but not bad.
  9. PT Cruiser
    Hello, so some of you may have seen my post about my 02 PT having low compression on a cylinder, so I'm starting to research pulling the engine out and getting a used engine for it. What's the best way to get the engine out from the top? I don't want to do it from the bottom as I don't have a...
  10. PT Cruiser
    Hello all! A few days ago I bought an automatic 02 PT Cruiser with 138k miles after selling my manual one that had over 200k! The car has been smooth sailing so far, just put in new shocks to replace the horribly bouncy OEM ones. However, I'm noticing a slight steering problem. The steering...
  11. Repairs, Maintenance, Help
    Had a large gentleman attempt to sit in the passenger side of my 1993 Chrysler New Yorker and the seat seemed to fall or move very quickly into the maximum recline position. Normally this is done by pushing the single button on the side of the seat. Now when I push the button it seems to run...
  12. Rumors and General Chrysler Discussion
    I thought this was a good read and to look at how beautiful Chrysler can make a car. https://www.foxnews.com/auto/new-york-citys-chrysler-imperial-parade-car-americas-heroes-70-years
  13. Repairs, Maintenance, Help
    Hi all, My name is Tim, and I live just outside Philadelphia. I've lurked and learned on these Mopar forums and others for a long time, but this is my first post here. I'm in my 30s, but I specifically love cars from the 40s and 50s, so this forum seemed to be the best place to ask a question...
  14. Repairs, Maintenance, Help
    I have stripped off the vinyl cover and the foam underneath. Now I am wondering how the fiberglass one piece top is attached. It has rivets, but they don't seem to go through the metal in the roof? I can see clips on the front that might come off if the most forward Chrome colored trim was...
  15. New Member Introductions
    Hello! I've been a PT Owner for the last 3-4 years or so. Spend a lot of time helping others on the facebook pages, figured I'd spend more time in actual forums instead. A little about me: I'm a British guy living in Kansas City, MO. Met my wife here back in 2015, moved and got married in...
  16. Mopar / Stellantis News
    https://www-motorious-com.cdn.ampproject.org/v/s/www.motorious.com/articles/news/charger-challenger-production/amp/?amp_gsa=1&amp_js_v=a6&usqp=mq331AQIKAGwASCAAgM%3D#amp_tf=From%20%251%24s&aoh=16398582215110&csi=0&referrer=https%3A%2F%2Fwww.google.com&ampshare=https%3A%2F%2Fwww.motorious.com%2Far...
  17. PT Cruiser
    Hi so I've never jacked my 2004 PT cruiser before and today I need to jack it from the front. Is there a good place in the middle front to jack from? Like a crossmember or something? If thats not possible where do i jack it from one side on the front? I know in the back theres a triangle then...
  18. PT Cruiser
    Hi so I have a 2004 PT Cruiser base model and I want to replace the cluster lights on it with a cool different color, I’m just not sure what size bulb to use! I’ve read online that it could be a T5 or T10, does anyone know which it is for sure? Thanks!
  19. Mopar / Stellantis News
    I know it's the least of Dodge/Chrysler's concerns right now while they just came under Stellantis, but I was inspired to talk about this based on my love of design and color, and from taking a color theory class in early college. And also the announcement of so many dropped colors on the 2022...
1-20 of 202 Results
Top