Allpar Forums banner

plymouth

  1. Photo and Video Lab
    All-original and unrestored 1950 Plymouth Suburban
  2. All other classic cars
    Parts from 1947 Plymouth Super Deluxe Business Coupe: two manual transmissions, a toe board, bellhousing, linkage, rear end housing & pumpkin, brakes, generator, external oil filter cans, crank, head from flathead six, NOS OEM pistons, .20 & .40 over sets. rods...door from sedan, bumper...
  3. Mopar / FCA News
    The biggest news from this past weekend’s Mecum Kissimmee auction in Florida was the Ford Mustang from the movie Bullitt, which sold for a record price of $3.4-million. There was so much attention focused on the car that Steve McQueen raced through the streets from San Francisco that many people...
  4. Cars and parts wanted
    84 Custom, if possible. Would accept an 83. Rear End damage cannot be repaired, unless I go to Debtors Prison LOL. Collision damage, but everything else about my 84 Wagon is tip-top shape. HATE to destroy the car. Really don't want to. Bad motor OK. Bad transmission OK. Solid body a must...
  5. Cars and parts wanted
    I've had this car just about 3 years. We have four garage slots and eight cars to park. I think it's time for something to go if I can get a decent price for it. So, testing the market for a 2-door wagon. Car would come with all extra parts including a driver door, complete NOS Sport Tone...
  6. Cars and parts wanted
    I’m trying to find my first car.. A 1972 Plymouth Duster VIN # VL29C2B393550 I had acquired the car when I was 16 in 1994. Had it painted and the slant 6 swapped for a 360 with a 727 torqueflite backed up by a Ford 9 inch with posi. To complete that 70’s look it had cragars and functional...
  7. EEK! - Every Extended-K Car
    Does anybody know what this door pin part is called? Last night I tackled my broken (93 Acclaim) door handle, I took off the door panel to discover why it was loose and didn't reset its' position. On the plastic handle mechanism there is a small hole on top, followed by a thicker hole on the...
  8. Cars and parts - sell and swap
    in need of total restorations , both cars have engines and drive train, wood is there for patterns but not really usable. 1 car has all 3 seats and basically complete. Cars are located in San Bernardino California cars will be sold as a pair .. message me here on the site for more info 3500 for...
  9. Mopar / FCA News
    Mike Mantel, owner and driver of the iconic Hemi Under Glass,  will have a new version of the car next year.  Mantel pointed out that new versions are part of the Hemi Under Glass heritage; in the 1960s, it was updated with each new model year.  (The first car, built  in 1965, was cannibalized...
  10. A Body: Duster, Valiant, Dart, etc
    So I noticed this a while back, but I thought it was just something rattling. Today I noticed it and thought I would record the sound, by the time recorded, the trans was fully warm. The noise is more noticeable when the trans is cold. This in only while in reverse. I check fluid and level...
  11. Repairs, Maintenance, Help
    I just bought a 1994 Plymouth Sundance duster with a 3.0 and a manual transmission. It shifts into 1-4 and reverse just fine but no 5th gear. The shifter will go into and stay in the 5th position but it won't engage at all, as if still in neutral. Has anybody dealt with this before or have any...
  12. Projects, mods, restoration
    Hello. Yes i am new to this forum and am seeking help and advise. I am going to be purchasing a 94 accliam becuase oddly enough I like boxy cars such as the horizon/ omni and spirit/ acclaim. Now my question is, is it possable to hit a 200 hp mark? I know I can get it to 150hp with the 2.5l...
  13. Cars and parts - sell and swap
    Selling a beautiful 1968 Plymouth Barracuda 340 Formula S convertible clone. This Cuda has a recently rebuilt 340 motor and an automatic transmission. The car runs and drives great and has always been garaged and cared for. The exterior is in great shape, including the grille and chrome...
  14. Repairs, Maintenance, Help
    Hi all, A few friends and I are working on a project 1961 Plymouth Belvedere. We just got the drums off and have installed all new shoes in each corner. We are lost when it comes to adjusting the shoes to get the drums on. It looks like instead of a typical star wheel the Plymouth has adjusting...
  15. Cars and parts - sell and swap
    360 Engine - 727 Trans with Reverse Manual Valve Body, will chirp the tires in all gears. Trans was rebuilt in 2010. Currently out of inspection and will probably need tires. Needs the front bearings re-done. Interior is in great shape. We also have the original metal hood that goes with the...
  16. Mopar / FCA News
    Since 1998, Allpar has provided new features every week. This is a sneak peek of two features scheduled to appear on Monday: What happened to the 2006 Imperial? — unveiled at the Detroit auto show, this longer-wheelbase version of the Chrysler 300C boasted a radically different approach to...
  17. All other classic cars
    hello, something is goofy with my plymouth’s electrical. The only thing the car does is honk. Key doesnt do anything whatsoever, no lights no crank no radio no nothin. I found a burnt light green wire hooked up to the fuse box and the fuse it was connected to was toast. So i replaced the fuse...
  18. Minivans · Pacifica
    Hey guys, I just got done bolting in the 2006 into the 99 van, I'm looking for advice and tips in finishing the project, all the mounts lined up great! ive got the power steering hooked up, ive switched the throttle cables and hooked up, I'm down to the electrical... Is there anything that I...
  19. All other classic cars
    Classic Mopar parts for sale. I have: 1939 Dodge Luxury Liner engine and transmission; 1940 Dodge Coupe fenders, front end and misc. parts; 1941 Plymouth 4-door sedan body and misc. sheet metal, engine and driveline parts; 1946-7-8 Chrysler/Dodge/Desoto/Plymouth parts; 1947 Chrysler limousine...
  20. All other classic cars
    For sale: 1942 Plymouth 4-door sedan. I have a complete front set of chrome included. This is a project car that will roll. No engine or transmission in it but can provide these at additional cost. $1,000.00. Located in Washington State.
Top