Allpar Forums banner

starter

  1. Repairs, Maintenance, Help
    I started with an intermittent problem where my Cruiser would not crank, not even a tic, tic, tic, tic. Then it became permanent. I have confirmed the starter is working by jumpering the 2 pins in the starter relay socket. I have totally disassembled the ignition switch but did not find...
  2. Repairs, Maintenance, Help
    I'm replacing the starter on my '74 Chrysler 440. The sheet-metal seal/shim (that fits between the starter and bell housing) is slightly bent, as shown in photo below. I don't know if this got bent when I removed the previous starter, or long ago. Is it O.K. to use this as is? My factory -...
  3. Repairs, Maintenance, Help
    I understand that there could be any number of 'things' that could cause this problem but I thought that I would run it through here for some ideas? A 2001 Sebring (2.7). Sometimes but not always when I go to start the engine I get a click. Turn the key off and back to start and it cranks...
  4. Repairs, Maintenance, Help
    Hey all, I have a 76 Plymouth Gran Fury Sport Suburban with a 440 in it, last fired up about 6 years ago. I've been trying to get it going for the last few weeks with no success. I've replaced the starter with one of the "high power" units (known working) from a running driving 75 Cordoba (at...
  5. Minivans · Pacifica
    I have a 94 3.3L Voyager that I had not driven for about 2 months. Turned the ignition switch to on: all of the idiot lights, warnings came on as one would expect; turned the switch to start - all went dark, no cranking. Turned switch to on, now no lights/warnings. I removed and visually...
  6. Repairs, Maintenance, Help
    I am pulling my hair out here and could use some help. A friend of mine has a 2001 3.8 Chrysler Town & Country with just about every option. It has been a reliable car never needing any repairs until now (some 200k miles later). Owner was driving to get fastfood in ~51 degree rainy weather...
  7. Minivans · Pacifica
    I need to replace the contacts in my 2005 3.8L Town and Country's starter solenoid. Does anyone have advice or tips on pulling and reinstalling the starter?
Top