Allpar Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. Repairs, Maintenance, Help
    I recently replaced both upper and lower control arms, tie rod ends, link pins, wheel bearings, brakes, and struts and bushings. I did this because I needed ball joints they were starting to go out and my struts started making noise so I replaced them even though I believe the problem was only...
  2. 1995-2017 FWD Sedans, Coupes
    I just bought a nice 99 Chrysler Cirrus with low miles (68K). All is good except for those noises coming from front end mostly when cold, turning at slow speeds, going over speed bumps. Also sounds like old, hard rubber parts. So based on that, do all front end parts need replacing? Just...
1-2 of 2 Results