Allpar Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I been trying to fix an a/c problem on an 01 Sebring, A/C changes on its own in direction and temp, have replaced a/c controls and mode door actuator, none has fixed problem. Was wodering if anyone has ran into this problem and what fixed it?

Thanks new to Mopar
 

·
Registered
Joined
·
1,476 Posts
JRAY072 said:
I been trying to fix an a/c problem on an 01 Sebring, A/C changes on its own in direction and temp, have replaced a/c controls and mode door actuator, none has fixed problem. Was wodering if anyone has ran into this problem and what fixed it?

Thanks new to Mopar
Which type of 01 Sebring? A 2 door or 4 door, because they do differ, and the engine that is in it may also make it differ, while I doubt it, it may.
 

·
Super Moderator
Joined
·
21,371 Posts
Welcome to Allpar. The DRB III (or equivalent) scan tool is capable of running calibration, tests and fault code checks of the BCM (sedan). This may be needed if the problem is intermittent. If the problem is consistent, that makes it easier to find.
A battery (memory) disconnect will put the system (sedan) in calibration mode when restarted for ~5 minutes.
The Mitsubishi-DiamondStar Sebring/Stratus coupes are a completely different car than the domestic sedans and convertible.
 
1 - 3 of 3 Posts
Top