Allpar Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I'm new to this forum and appreciate any help you can offer. My daughter has a 2003 PT Cruiser GT turbo with an automatic transmission. The back up lights do not work. We replaced the neutral/ safety switch (tranmission range sensor) in the transmission but there is still no power going to the backup lights. We have checked the bulbs and the ground. Thanks for your help!

Cruiserdad
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thanks for the reply. We had checked the ground and the fuses first and they are fine. There is no power at the number 1 pin on the 10-way transmission sensor connector . On the connector pinouts it's function is listed as the "fused ignition switch output". I was hoping that someone may know where a break or short might typically be .
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top