Allpar Forums banner
1 - 3 of 3 Posts

·
Premium Member
Joined
·
551 Posts
Remove the battery and then its tray and you'll be looking directly at the shifter cable attachment points. There will be a battery temperature sensor attached to the bottom of the tray. Make sure it's in the original position when you reinstall the tray.
As was said above, I also highly recommend the "BOOGER BUSHINGS".

Jerry
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top