Allpar Forums banner

1954 Dodge axle removal

4894 4
I am restoring a 1954 Dodge pickup truck C1-B6 and I need to know how to remove the axles to replace the inner rear seal because its leaking. Thanks
1 - 2 of 2 Posts

·
Registered
2017 Ram 1500 3.6 Crew
Joined
·
3,141 Posts
It is a tapered bearing assembly and there are end play specs. That keeps the bearings running practically forever and keeps the seal in proper relationship. You may need to make shims to adjust the end play. Cups are set with the tapered face inward. Add shims to the flat back of the cup to decrease clearance. I would check the end play before I pull the retainer to see if it needs adjustment so that the seal does not get disturbed by the shimming process.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top