Allpar Forums banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
20,349 Posts
Welcome to the forum. Had to double read your post to make sure, but unless you are going to simply raise the whole body on the frame, install spacers where everything mounts to the frame, the front and rear bumpers attach to the frame and a simple quarter inch plate to raise the bumper bracket holes and reattach would fix that issue, and having the exhaust end re-bent to raise it three inches would fix that issue. If you intend to raise the truck in another way, please let us know how you are going to do it.
 

·
Premium Member
Joined
·
20,349 Posts
No need to weld, The plate will simply be as tall as needed to relocate the bumpers, use the bolts in the frame to bolt the plate on, bolts holes located three inches above to bolt the bumper to. All you are doing is raising the bumper and relocating it as high as you need and use bolts to hold it together. Quarter inch plate will be strong enough to hold things and it be safe.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top