Allpar Forums banner

1995 2nd Gen. front shocks etc. on 1990 1st Gen.?

1450 Views 2 Replies 2 Participants Last post by  Kevin1990
Gentlemen,

short question....are 1st and 2nd Gen. Minivans sharing their front shocks and tie rod ends?

I already got the bigger bolt pattern, should fit right?
Asking cause i´ll recieve some NOS parts very cheap, would be great if it all fits.

Thanks again,
Kevin
1 - 3 of 3 Posts

· Registered
Joined
·
6,110 Posts
Hey Kevin, Autozone shows the same strut for both, so I guess you'd be okay. I used a 90 model with the 3.3 engine and a 95 with the 3.0 as a reference. You can go to autozone.com yourself and find out. Don't just take my word for it, okay?
 

· Registered
Joined
·
525 Posts
Discussion Starter · #3 ·
OK thank you very much!

Checking some parts right, now, didn´t know Autozone that well, Rockauto showed a few different numbers, so i wasn´t sure.

Thanks again!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top