Allpar Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
698 Posts
Discussion Starter #1
Gentlemen,

Are the 1st and 2nd Gen. Minivan leaf spring bushings the same?
Cause i´d get some new Mopar bushings, but they are listed for the 2nd gen., FWD, no AWD.

The main bushing (the big one) is the same like the one in the 1st gen, says Rockauto.

Would be great if i an use them for my Voyager.

Thanks a lot (again)
Kevin
 

·
Super Moderator
Joined
·
21,369 Posts
1984-85 were the same, but changed to 4228492 for the front and 4228564 for the rear from 1986-95. The rears were 2-piece bushings, so you will need a total of four. I show the same bushing for FWD and AWD.
 

·
Registered
Joined
·
698 Posts
Discussion Starter #3
ImperialCrown said:
1984-85 were the same, but changed to 4228492 for the front and 4228564 for the rear from 1986-95. The rears were 2-piece bushings, so you will need a total of four. I show the same bushing for FWD and AWD.
OK perfect, thank you very much!

My Voyager´s a ´90 model, so they should fit. Yes i got 2 front bushings and 4 smaller for the rear.
 
1 - 3 of 3 Posts
Top