[GLHS60]

The minivan wheel pictured is the larger bolt circle so these will not fit your 15" Spirit/Daytona wheels as they are the smaller 5 on 100 mm bolt circle. However the center caps from a 14" steel wheel (5 on 100mm ) will fit the Spirit/Daytona wheels. I had this setup on my black Omni a few years ago and liked the "cop car" look.
White letter tires on black steel wheels rock!! Small chrome cetter cap finishes it off nicely.

All 14" wheels are 5 on 100 mm bolt circle.
Some 15" wheels are 5 on 100 mm bolt circle
Most 15" wheels are the larger 5 on 114 mm ( 5 0n 4 1/2" ) bolt circle

Thanks
Randy

 

[GLHS60]

Oh i forgot....how are those caps mounted on the wheel?

I just got the little holes arround the bolt pattern, any mounting screws or pins needed?

The center caps are held on with 3 screws that go from the back of the wheel into the center caps so the wheel must be off the vehicle to remove/install the center caps. The caps on the red Voyager in the picture look like the correct ones.

Thanks
Randy

 

[GLHS60]

Oh how great is that, thanks!

I already got them off, they´ll get sandblasted and repainted next week, any special screws needed? (Flat head or so)

Thanks
Kevin

Thet are special self threading, socket headed screws, hopefully the caps you get will have them. If not I can send you a picture of one and the specs.

Thanks
Randy

Also the Red Voyager minivan in the picture has a unique to me Chrysler nameplate over the number plate. Any more pictures of the van inside and out, curious as to what Ero spec changes are made?

Thanks
Randy

 

[GLHS60]

There were some minivans with 5 on 100mm 15" alloy wheels.

Thanks
Randy

All K based CAR wheels are 5x100mm regardless of if they are 14", 15" or 16" (other than the obvious 4 lug ones).
Minivans with 14" wheels were 5x100mm. They used a wheel that looked just like the pictured one, though the same wheel design was used for the 15" minivan with the larger bolt pattern.