Allpar Forums banner
1 - 1 of 1 Posts

·
Super Moderator
1966 Crown Coupe, 2016 200 S AWD, 1962 Lark Daytona V8.
Joined
·
22,977 Posts
I don't know about different size oil pickup o-rings, but a smear of RTV around the o-ring sealing surface should seal the joint. Are you using a 5W-30 motor oil?
Zero psi is bad. Minimum oil pressure at a hot idle should be at least 7 psi and I would feel better if it was around 20.
Could the front cover oil pump pressure relief valve be not seating or stuck slightly open?
 
1 - 1 of 1 Posts
Top