Allpar Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
464 Posts
your issue is a feeling of not releasing - hanging up caliper? - if so -
I have seen the flex brake hoses fail - an internal issue, they can act as a check valve .
Often happens when the component is allowed to hang during repair or twisting during install, ie pad or rotor replacement..
 

·
Registered
Joined
·
464 Posts
Did I restate your issue correctly- I am not sure....

The hoses failure is INTERNAL ... the deterioration not visable BUT with the varing brake pressure an intermitant.
Try this - remove affected wheel - apply brakes heavly... then release - open the bleeder if there is a restriction fluid will express under pressure....

Another interpatation* of your issue - MAYBE a diffferential problem.... do you have AWD or locking/posi rear?

*sorry every time I read OP I interprete differently... getting old I guess
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top