Allpar Forums banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
20,292 Posts
First off, welcome to the forum.

There is a little bit of legwork you are going to have to do. Verify the PCM was updated to the 2011 engine. Things like sensors, locations or movement of such can vary and may not be working or sparking when it is supposed to. I think there was a big computer change in 2007.

In the meantime, verify fuel getting to the injectors, the rest is all electronics.
 

·
Premium Member
Joined
·
20,292 Posts
What you are going to have to do is physically check the location of each sensor (especially ignition timing location and fuel injection sequence), and change out the PCM because internally the electronics package is definitely an issue. Another thing is how much the previous owner actually changed. Did he start with a wrecked car and swapped TB to oil pan and every single sensor, or was it a stripped engine and he bolted the original stuff onto the newer block and heads? If you could find out where he got the engine from a yard (I would suspect), see if the PCM is available, which may speed up the process and get her to run.
 
1 - 2 of 2 Posts
Top