Allpar Forums banner
1 - 2 of 6 Posts

· Super Moderator
1966 Crown Coupe, 2016 200 S AWD, 1962 Lark Daytona V8.
Joined
·
17,607 Posts
I have replaced worn sway bar links and bushings on these. Get a second opinion on the shocks.
Can you hear the noise when jouncing the front end with a couple of helpers? The shocks can be replaced separately if needed.
 

· Super Moderator
1966 Crown Coupe, 2016 200 S AWD, 1962 Lark Daytona V8.
Joined
·
17,607 Posts
For bushings, I would only go OEM.
Links should be avaiable aftermarket with grease fittings. Even so, I have seen grease fitted links fail early because of cheap rubber joint boot sealing.
Worn rubber bushings may have a thud or knock sound over low speed bumps where links have more of a bang or rattle sound quality.
 
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top