Allpar Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
864 Posts
Discussion Starter #1
Hey guys, my dad came up here to canada to visit from texas and we were wondering if you can change the units displayed to KM/H. I am not talking on the speedo itself, I am talking about the part in between the speedo and tach where you can make it display the current speed using the "Step" button. I looked in his book and it shows that you can in the more expensive version of the vans, but doesn't show anything about his. He has a more basic model that came with the Uconnect system. So the button on the left side of the steering wheel are for this system, not the one shown in the book(this would be the one where you can scroll up and down through the menus)

any help would be appreciated.
 

·
Registered
Joined
·
470 Posts
In my '11 when it is displaying MPH in the EVIC (digital readout between the gauges) you hold the reset/enter button to switch to kmh. Has the symbol that is the same as the enter key on the computer...
 

·
Registered
Joined
·
262 Posts
On the base display I don't think you can reconfig the display via the buttons. I tried going to MPH from KPH and no dice. I think the only way to change it is have the Dealer change the country code to Canada.

Steven[at]AZ, The base display only has STEP/RESET (no arrows)
 
1 - 3 of 3 Posts
Top