Allpar Forums banner
1 - 1 of 3 Posts

· Registered
7 Posts
Discussion Starter · #1 ·
Hey guys, my dad came up here to canada to visit from texas and we were wondering if you can change the units displayed to KM/H. I am not talking on the speedo itself, I am talking about the part in between the speedo and tach where you can make it display the current speed using the "Step" button. I looked in his book and it shows that you can in the more expensive version of the vans, but doesn't show anything about his. He has a more basic model that came with the Uconnect system. So the button on the left side of the steering wheel are for this system, not the one shown in the book(this would be the one where you can scroll up and down through the menus)

any help would be appreciated.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.