Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
646 Posts
Discussion Starter · #1 ·
I am looking for a factory 5.7 liter Hemi intake manifold. I need one with the integrated PCV valve. I believe there were 5.7's made without the MDS and used an external hose instead of the screw-in PCV valve. It can be cracked, warped, and basically non-functioning. I don't need the throttle body. I am engineering something for the PCV circuit. All I ask is that the PCV valve is intact. I will get back to you quicker if you email me.

Mike Holler
[email protected]
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top