Allpar Forums banner
1 - 5 of 8 Posts

· Registered
8 Posts
Discussion Starter · #1 ·
As the title says I have a 69 Barracuda, now originally it was a small block with A/C but before it was imported to Australia the owner fitted a 383 and removed the A/C OK. Now I have it and don't know how the heater controls work, I push the buttons on the dash but nothing happens. I see under the dash that there are a number of vaccum lines and am unsure how this system works. Any information would be a help, like where do the vaccum line get their vaccum from?
P.S. I know that BB Barracuda's didn't have the A/C option due to crampt conditions & I don't want to put A/C on the car either.
1 - 5 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.