Allpar Forums banner

727 BB Auto Transmission Yoke

2785 2
727 Automatic Transmission / Big Block

At the suggestion of my trustworthy local mechanic who certified my car, he recommended changing out the yoke due to wear around the U-joint. I ordered a new yoke but the new yoke would only go on about 1/3 and it would stop dead. I contacted the supplier who sent me another in case I had a defective one. While it slid on better, it too only went on about 1/3 and stopped dead. It goes on straight without any twisting/turning. I'm at a lost now. I don't want to spend the $$$ to get another yoke from another supplier (mopar)

Anybody else have this problem? Any suggestions?

Much Thanks.
Top