Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
117 Posts
Discussion Starter · #1 ·
I`ve been having some steering issues for the last little while. I finally took my car in for an inspection, and they told me I new new control arms, ball joints, and one inner and outer tie rod. The steering rack itself is fine.

I can`t afford to pay labour costs, so I`m going to tackle this myself. I`ll replace all the inner and outer tie rods while I`m at it. It sems like a relatively staright-forward job. I`m wondering how much time this should take, and if there are any tips or advice you can share before I start.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top