Allpar Forums banner

91lebaron conv. key cylinder popped out

1819 Views 9 Replies 4 Participants Last post by  neon98rt
i was suprised when yesterday my 91 lebaron conv. key cylinder popped out!

i managed to wiggle it back by pushing it in and turning key clockwise, like FSM advised.
i noticed that the "pin" that is supposed to be locking the cylinder in place was missing.
i suppose i need to go and buy new cylinder. ok.

surfed rockauto.com and noticed that atleast they dont offer key cylinder to 91, only to 92 and newer?
is it different in 91.

i have new more curved dashboard that came in 91 ... (with tilt wheel and analog gauges, floor shifter 3.0automatic) otherwise plain jane model

thanks a lot!
1 - 3 of 3 Posts

· Registered
Joined
·
610 Posts
i just did this. Make sure you get the correct one. One has a C shaped up on the end and the other has a flat end. The computer showed that my 90 took one but it really took the other.
 

· Registered
Joined
·
610 Posts
it was over 100 US to get mine from a dealer so it matched my old key. I just went for the 20 dollar one and now i have two keys. \

If i have my old lock you can have it for the pin.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top