Allpar Forums banner

'94 Shadow ES

1272 Views 5 Replies 5 Participants Last post by  MoparJeff
Went to use my wipers this morning, turned the swtich and nothing. :thumbsdown:

They worked fine a few moments ago. Good thing I was close to home and didn't really need them.

A check of the fuse, it was good. I even swapped fuses just to be sure.

So the problem is either the switch, the wiring, or the wiper motor.

I do have spare motors. But a spare switch? :(

Mopar wants $105 and change with my father's employee discount.
AZ wants $58.99

Can any tell me is there a module for the wipres I'm not aware of and could possibly the problem?
Or just suck it up and buy a new switch?

I can hear the windshield washer operating when the end of the switch is depressed so I know that part of the switch still functions. For what it's worth.
1 - 1 of 1 Posts

· Fleet Owner
182 Posts
Check the ground on the motor first. It's easy, free and a relatively common problem.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.