Allpar Forums banner

97 cirrus 2.5 stalling

12303 Views 79 Replies 11 Participants Last post by  Rocky A
so I pick up this cirrus drove fine first day . Next day in the morning I turned it on . About a minute went by and it shut it self off . Thought maybe it sat awhile before I bought it . So drove it to work and with in 25 minutes came to a light and it shut off at the light .started right up . Still doing the same thing . Replaced the alternator because it failed voltage regulator. Swapped the auto shut off relay . Cleaned the throttle body and cleaned the iac . No change . No codes no lights on dash . Any ideas ?
1 - 1 of 80 Posts
If you suspect the distributor (and you should), spray a fine mist of water on it when the engine is running.
It'll probably stall and send sparks all over the outside of the housing, indicating you need to replace it.
The distributor cap is also suspect.
  • Like
Reactions: 1
1 - 1 of 80 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.