Allpar Forums banner

97 GC SE 3.3 cruise control inop, where to start?

1773 5
Cruise control stopped working in our '97 GC SE 3.3. The CEL is on showing P0104 or whatever the EGR code is. Cruise has worked with this CEL before. The CRUISE light illuminated when I press ON but it won't set. Any tips on diagnosing?

Thanks,
Sixto
'97 GC SE 3.3 230K miles
1 - 2 of 2 Posts

· Registered
Joined
·
163 Posts
Discussion Starter · #6 ·
To close the thread, the plastic vacuum line from the plenum to the actuator was broken. I mean in plain sight just ahead of the throttle body. Cruise is working again. Thanks!

Sixto
97 GC SE 3.3 236K miles
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top