Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11,099 Posts
The Electron said:
What do y'all know about problems when using 2nd gen engines in 3rd gen vans, and vice versa?
The 3rd Gen minivans were OBDII compliant and a few changes took place. The basic long block should work, but sensors and electronics will be different. The 3.0 probably had the bigest changes in 1996 when they replaced the opical distributor with a Hall-Effect unit and added a flex plate with timing slots and a crank position sensor on the transmission bell housing.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top