Allpar Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter #1
i have a 99 dodge ram 1500 4x4 went for state inspection today and it failed due to the high beam low beam ok here is what i can see put the head lights on and my drivers side head light seem to be high on the low side pass side seem to be right. put the high beams on drivers side seem to be on the low side high is working on pass side any help would be great because i have till the end of the month to figure it out thanks
 

·
Registered
Joined
·
50 Posts
Discussion Starter #2
Ok after looking at it alittle closer it seem to be the drivers side light is reverse the high beam is on the low side and there have been no changes to the wiring I'm at a loss here
 
1 - 2 of 2 Posts
Top