Allpar Forums banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
33,541 Posts
I agree with Tannon, very possible that it was installed backwards. If so, it won't flow or will flow too little to run. There is usually an arrow on the outside of the case, or some text, to indicate fuel flow direction. It should not be damaged if it were installed backwards.

If that isn't the issue, look to see if you accidentally disconnected a wire, vacuum tube or something while working on the filter.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top