Allpar Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
654 Posts
sounds like a cool project I have had and still have many Dodge trucks of all years from 1956-2011, and I know its irrelavent at this point as the 75 sold but you mentioned issues surrounding the vin plate if you switched the dash but I have done this on my sons truck already and the plate is attatched to the metal dash near the windsheild which only 2" of it approximatly is exposed the part you would change would be the plastic cap and glove box which are sperate and dont contain the vin plate, a relativly simple job minus the laying upside down and scratchs on your forearm part, good luck with your project
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top