Allpar Forums banner
1 - 1 of 1 Posts

Premium Member
2,290 Posts
Chrysler 180 and 2 Litre in Spain (Barrieros)

by Andy Thompson

At the beginning of 1975, the assembly lines of the Chrysler 160, 180, and 2 litre (also used to build the Chrysler Centura) were transferred from France to Spain's Barreiros factory in Villaverde. The plant, which belonged to Chrysler, specialized in making trucks, though it also assembled Simca cars and built the V8-powered Dodge 3700GT, for Spain.

Land vehicle Mode of transport Vehicle Automotive parking light Car

The 160, 180, and 2-litre were not modified much for sale in France and Britain. In Spain, the company dropped the 160 entirely, and made a two-liter Barreiros diesel optional. Chosen largely because Chrysler owned Barreiros, a local company, it was a conventional four-cylinder design, with indirect fuel injection, rated at 65 CV at 4000 rpm and 13.2 m.Kg of torque at 2100 rpm. The 2 Litre's transmission was kept (a four speed manual with a 215mm clutch). Tyres were 165 SR 14 and brakes followed the original 160 - discs up front, drums out back.

The Simca 1307 was also sold in Spain as the Chrysler 150.

Both trim levels had the dashboard of the Chrysler 160, which didn't have a tachometer (the 180 did). The two front spot lamps easily distinguished the luxury model. Fuel consumption varied from 6.5 litres/100 km on the open road at an average speed of 80Km/h to 9 litres/100km in urban motoring. Top speed was just 134 Km/h.

Spanish taxation was based on the engine size, at the time; the top band of 13 CV corresponded to a cubic capacity of 1920 cc. Spanish rules were designed to encourage smaller, more economical cars. Until 1976, the tax was 16% of the price for the vehicles of less than 8 CV, moving to 20% above that. From 1976, the taxes increased to 17.2% for 8 CV and 22% for those over 8 CV. In November 1977, a third category appeared: a tax rate of 35% for vehicles of 13 CV and more.

Photograph Formal wear Suit Aerospace engineering Blazer

The Chrysler 2 Litre and its diesel sister were hit by the 1977 luxury tax, so the Chrysler 2 Litre was replaced by the Chrysler 180 automatic. The diesel was shaved down to 1.92 liters, dropping it down to the next taxation band, saving 13% of the purchase price. Neither fuel consumption nor maximum speed were affected by this reduction in engine size.

In 1978, Chrysler España campaigned for sales on basis of the fiscal advantages of the revised 180 series. Peugeot purchased the company from Chrysler in 1980, renaming Chrysler cars to Talbot (the truck and bus division was sold to Renault).
Petrol/gasoline engine production ended sometime in 1980, but production of the diesel lingered on until 1982.

The Chrysler had reasonable success, and was commonly seen in taxi form. Local body builders carried out limousine and station wagon conversions, although the company never listed these officially.

Simca 180/Chrysler 2 LitreBarrieros and Chrysler in Spain

Chrysler 1904-2018

Spread the word via <!--Tweet or--> Facebook!

We make no guarantees regarding validity or accuracy of information, predictions, or advice - .
Copyright © VerticalScope Inc. All rights reserved. Dodge, Jeep, Chrysler, Ram, and Mopar are trademarks of Fiat Chrysler Automobiles.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.