Allpar Forums banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
20,348 Posts
It is possible that over time the seat moving mechanism has gotten stuck in the open position, meaning it needs to be cleaned at a minimum, and at the most, the metal wire used to release and lock the seat in place has become damaged or broken, and I think there is a spring in there, too. Since the seats are difficult to really look at with such small clearance, recommend removing the four nuts from underside of the car, or may be bolts on the front and rear supports, and turn the seat over and really check out the condition of the mechanisms on the side.

Oh, and welcome to the forum. What running gear does your 'doba have?
 

·
Premium Member
Joined
·
20,348 Posts
Running gear is the engine and transmission. 360 2bbl is a good combination for a first car, Cordobas were really nice looking cars.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top