Allpar Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
653 Posts
Discussion Starter #1
As some know im doing a manual swap these days- now when installing cruise-control and throttle cable i ended up with these two cables only. With my autotrans i ended up with three cables.

Is two cables connected to throttle(body) correct end enough?
 

·
Super Moderator
Joined
·
31,989 Posts
Yes, one is the throttle cable from the gas pedal, the other is the cruise cable from the servo unit. Automatics have a kickdown (downshift) cable in addition.
 
1 - 6 of 6 Posts
Top