Allpar Forums banner
1 - 20 of 39 Posts

·
Registered
Joined
·
339 Posts
Discussion Starter · #3 · (Edited)
Why do they always add those cheesy generic flames on cars.
Hi ACE!


Those particular flames are not my cup of tea either, but everyones tastes aren't as exquisite as mine.

How about these from PTCHIX. A well known lady PT owner from back in the day.

Her PT even made it onto the cover of the MOSS MOTORS PT custom parts catalog.
Tire Automotive parking light Wheel Vehicle Car

Tire Wheel Automotive parking light Sky Automotive side marker light


or this one from Texas
Wheel Tire Car Vehicle Automotive parking light


or these REAL FLAMES.
Car Land vehicle Vehicle Automotive tire Tire



Jerry
 

·
Registered
Joined
·
339 Posts
Discussion Starter · #4 ·
How about these unique flames on the MOTHERS WAX custom PT.

It was literally one of the first PTS to be customized and it holds another major MAJOR distinction that I'll post about later.

It also is an early example of Mike Lavallee's REAL FIRE art work. and one of the early panel van conversions.

Tire Wheel Car Vehicle Automotive lighting


Here is an example of his handiwork on a prowler.
Car Land vehicle Wheel Automotive parking light Vehicle



Jerry
 

·
Registered
Joined
·
167 Posts

·
Registered
Joined
·
339 Posts
Discussion Starter · #6 · (Edited)
Hello! I like the smoke one
The owner of that PT went by the name THier when he was a member over at THE CREW. He was there since the early 2000's, as was I.

If I remember correctly his 1/4 mile times were in the mid 12's.

A stock, properly tuned GT turbo PT consistently turns in the low 15's..

An N/A PT turns in the mid 17's.

Here's some smoke from the first 4 cyl. 2.4 Gt turbo PT to produce an 11 second ticket. It was called 'TOTAL SLEEPER".

Car Vehicle Automotive tire Hood Tire


He makes some smoke also because of this under the hood and a lot of other speed engineering goodies.

Vehicle Hood Automotive tire Motor vehicle Building


Automotive tire Motor vehicle Automotive lighting Vehicle Automotive design


[email protected] Q/M pt cruiser at 430whp - YouTube

I'm sure you noticed that this run was with 430 h/p.

A short time later he had built it up to 599 h/p.

Jerry
 

·
Registered
Joined
·
339 Posts
Discussion Starter · #7 ·
Look at these pics - blink - look again. :unsure:

Wheel Tire Vehicle Car Hood



Car Tire Wheel Vehicle Hood


NO, that is NOT a customized PT CRUISER.

It IS a 1947 Chrysler Windsor Highlander.

It has gone through some expert customizing and they obviously used a set of PT headlights and a set of PT taillights during their reconfiguration of this Convertible.
Very well done and initially confusing to present day PT owners. o_O


Jerry
 

·
Registered
Joined
·
339 Posts
Discussion Starter · #8 · (Edited)
This great PT was a frequent participant at most of our central Fl. shows.

A split hood is unique to say the least. This shows some out-of-the-box thinking that was well executed in real life.

Car Land vehicle Vehicle Vehicle registration plate Wheel


The door spear treatment, the fog light mod, the front Chrysler emblem placement were all mods that were original to this PT.

Jerry
 

·
Registered
Joined
·
183 Posts
Here's mine.....

Car Automotive parking light Wheel Tire Vehicle


Automotive parking light Car Vehicle Automotive side marker light Grille


Wheel Tire Car Automotive parking light Plant


Car Vehicle Grille Hood Automotive lighting


Car Land vehicle Vehicle Speedometer Motor vehicle


Car Plant Vehicle Steering part Automotive design


Vehicle Car Motor vehicle Automotive tire Automotive lighting


Wheel Vehicle Speedometer Odometer Automotive tire
 

Attachments

·
Registered
Joined
·
339 Posts
Discussion Starter · #11 ·

Hi Handy!

What a co-inky-dink. ;) Your PT was one of the next three I Have lined up to post here in CUSTOM PTS.

It's an example of choosing the perfect balance of styles and mods that can be applied to our PTs.

On a sad note, Handy looked long and hard to find several of his mods. I doubt you'll find them today.

For example;

1. You can no longer buy the instrument pillar pods for the regular PTs, let alone the vert.

2. I doubt very much if you can find that particular vert style rear wing. :cool:

3. That style engine bay stabilizer is no longer available for the PT today.

4. The well balanced SUNCOAST CREATIONS hood really looks right on a PT.

5. You're making good use of the oem composite intake vanity cover. It is functional ( it has an insulating heat pad barrier under the cover) AND it gives a classy look to the engine bay.

Most importantly you and your wife thoroughly enjoy the PT. That has been attested to by the many posts that you have regaled us with on several PT sites over the years.

Well done Handy!

Jerry
 

·
Registered
Joined
·
339 Posts
Discussion Starter · #20 · (Edited)
I love the look of these full height grills, uninterrupted by the bumper. Are these completely custom or can the components be purchased?

Sadly that particular style is completely hand fabricated. I'm sure that just by examining it closely, you'll see that it took a lot of talent to get to that finished product.

The only company that has ever made anything close to that look is PTeazer. He has downsized his PT business and is now only available on FACEBOOK.

He has several different versions of the style available.

Here is the link.

Chrysler PT Cruiser & PTeazer Creations Everything Mild To Radical & More | Facebook


Jerry
 
1 - 20 of 39 Posts
Top