Allpar Forums banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
33,538 Posts
Check the throttle body for loose hold-down bolts or leaky gaskets.

It's also possible that someone messed with the air mass flow screw on the throttle body, thinking that it's an idle screw. It's not, it's set at the factory and must not be touched after that.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top