Allpar Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter #1
I have a turbo for a Daytona and I'm not sure whether it's for a Turbo 1,2 or 3. I'm hoping someone can help me out fairly quickly.

On the Turbo plate I have the following numbers - 4387320 466798-5 and QF0160P

Anybody have any idea?? Any help is appreciated Thanks!!!!
 

·
Registered
Joined
·
451 Posts
Does it say "Mitsubishi" or "Garrett" on the compressor housing? If it has "Garrett" printed there, what are the numbers with it?
 

·
Registered
Joined
·
70 Posts
Discussion Starter #3
Yes it is a Garrett and those numbers I listed above are off of the identification plate. The numbers that are molded on to the intake housing are M27 BCC
 

·
Registered
Joined
·
451 Posts
466298-5 is a Chrysler Garrett Turbo:
CHRYSLER 4105797 466298-0005
TURBOCHARGER, TB0335
CHRYSLER 4387320 466798-0005 TURBOCHARGER, TB0352 CHRYSLER 4387320 466798-0005 TURBOCHARGER, TB0352
TB0352 or TB0335 should be on that housing as well, depending on if that number is a 7 or a 2. They might look pretty similar. Looks like the TB0335 is a T1 turbo, and the TB0352 is a T2. Depends on if that number is a "7" or a "2". Last bit of info was found from: http://worldturbocharger.en.alibaba.com/product/299006482-200388750/compressor_wheels_for_Garrett_T3_1_409096_0005_.html

Scroll down till you see Chrysler listed. It's between 1/2 and 3/4 of the way down. Hope this helps some.
 
1 - 5 of 5 Posts
Top